Kenwood KPG-49D RSS Programming Software. Skip navigation. Kpg-49d programming file. Download works just fine on Win 7 and below. Not tried Win 8. Steve harvey tv show.

KPG-49D software is a tool for programming the TK-780/880/280/380/980/981/480/481 transceiver. (TK-980/981/480/481 does not have Conventional Format) Using this software, first enter programming data into the computer, and then transfer the data to a transceiver. You can print out the data on a printer. You can also retrieve data from a transceiver to edit on the computer.

APPLICABLE TRANSCEIVERS This programming software supports the following transceivers: Conventional Format TK-780 (Mobile;VHF) TK-880 (Mobile;UHF) TK-280 (Portable;VHF) TK-380 (Portable;UHF) Trunking Format TK-780 (Mobile;VHF) TK-880 (Mobile;UHF) TK-280 (Portable;VHF) TK-380 (Portable;UHF) TK-980 (Mobile;800MHz) TK-981 (Mobile;900MHz) TK-480 (Portable;800MHz) TK-481 (Portable;900MHz) HARDWARE/ SOFTWARE REQUIREMENTS: This software is designed for use on an IBM PC, PS/2 and compatible computers with 10 Mbytes hard disk space, 32 Mbytes RAM. Super VGA monitor or better. 800X600 or higher resolution recommended. The operating system must be Microsoft Windows 98/2000/Me/XP. The computer must have a serial communication port to connect to a transceiver and be compatible with an IBM asynchronous communications adapter. You may select from the COM1-COM20 port on the computer. Use a Kenwood KPG-36(for portable) or a KPG-46(for mobile) programming cable to connect the computer to the transceiver.

A commercially available DB-25 male to DB-9 female adapter may be needed depending on the port configuration of your computer. Caution: The computer resources may run short if you run the KPG-49D and other software simultaneously. CONNECTING THE EQUIPMENT PROCEDURE: 1.

Switch OFF the power to the computer. Connect the 25-pin connector on the KPG-36/46 cable to the COM1 - COM20 port on the computer. If the computer's COM port has 9 pins, use the DB-25M to DB-9F adapter. Switch ON the power to the computer.

The fakir ruzbeh bharucha ebook free download. Power OFF the transceiver. Connect the other end of the KPG-36/46 cable to the universal connector on the transceiver. Power ON the transceiver. PROGRAMMING OVERVIEW PROGRAMMING METHODOLOGY: This section explains three typical programming operations. Note: When the programming data is transferred from the PC to the transceiver (writing the programming data) or vice versa (reading the programming data), the transceiver will automatically enter PC mode.

'PROGRAM' appears on the display. CREATING AND WRITING NEW DATA TO TRANSCEIVER 1. Specify the transceiver model you want to program. Input all necessary data. (Channel Information, Edit/Optional Features, etc.) 3. Write the data to the transceiver.